Commercial Epoxy Flooring in Orlando, FL

Commercial Epoxy Flooring in Orlando covers a wide range of businesses. The metro is home to the Orange County Convention Center, which Wikipedia lists as the second-largest in the country, along with one of the busiest airports in the U.S., major hospital systems, Lockheed Martin's manufacturing operations, food processing, and the Central Florida Research Park, with more than 120 companies on over 1,025 acres. Each of those settings has back-of-house concrete that takes carts, pallet jacks, spills and heavy cleaning. A concrete floor coating designed for that use protects the slab and keeps the floor easier to clean.

Matching the system to the work

Commercial floors are not one product. We start by asking what happens on the floor: forklift traffic, rolling carts, hot water washdowns, chemical spills, food prep or simply heavy foot traffic. Then we choose from:

• 100% solids epoxy for thick, hard-wearing coverage in warehouses, shops and storage areas.
• Polyaspartic or urethane topcoats for UV stability, scratch resistance or chemical resistance.
• Textured or grit-filled finishes for wet areas, ramps and entries.
• Flake broadcast for retail floors, break rooms and service bays where appearance matters.

Moisture and slab conditions

Commercial slabs in Central Florida are often on grade, without a vapor barrier, especially in older buildings. With the region's wet summers, those slabs can push moisture into the coating. We test before we quote, and where readings are high we specify a moisture-tolerant primer. We also look for joint failure, curling at slab edges, and old coatings that must come off.

Keeping the doors open

Closing a business costs money, and many Orlando businesses run long hours for visitors. Bob Vila's polyaspartic guide notes that businesses may need to close for a day or two for an install. We can phase work by zone, schedule nights or weekends where it makes sense, and choose faster-curing products to shorten the downtime. The order of work gets agreed with you in advance.

Get a Free Estimate

Industrial floors and safety

In production and warehouse spaces, a coating can do more than look clean. Line striping marks aisles and work zones, and safety colors can mark hazards. Textured finishes add grip where floors get wet. A light-colored floor also reflects light, which can brighten a dim warehouse. We discuss these options with you and the people who run the floor.

Food service and clinics

Kitchens, breweries and food prep areas need floors that can be scrubbed and that hold up to hot water and cleaning chemicals. Clinics and labs need seamless surfaces that are easy to sanitize. We can add a cove base that curves up the wall so there is no seam for dirt to collect. Your inspector or facility manager sets the specification, and we build the floor to meet it.

What it costs

For 100% solids systems in commercial and industrial settings, HomeAdvisor's figure starts at $12 per square foot and goes up, and contractors often set minimums of $500 to $1,000. Large open warehouses can price differently from small kitchens with many corners and drains. Our written quote breaks down prep, repairs, the system and any striping.

Questions to settle before we quote

For a commercial floor, a useful quote depends on good information. We will ask about the square footage and layout, what equipment runs on the floor, what chemicals or cleaners are used, whether the area is wet, the hours you operate, and any requirements from your landlord, inspector or corporate standards. We will also ask whether the slab has a vapor barrier if you know, and whether any part of it has been coated before. The answers shape the system, the prep and the schedule.

Care and recoating

Commercial coatings last longest when they are cleaned on a routine schedule with the right products and when damage is fixed quickly. A chip in a forklift lane can grow if it is ignored. Many floors can be refreshed with a new topcoat when traffic paths wear dull, which costs much less than a full redo. We can talk through a maintenance plan when we hand the floor back.

Small businesses count too

Not every commercial floor is a warehouse. We also coat barbershops, gyms, pet groomers, auto detailers, retail backrooms, storage units and small offices. These spaces often have tight hours and small budgets, so we keep the system simple and the schedule short. A flake floor with a polyaspartic clear is a common choice because it looks clean, handles daily traffic and cures fast enough to reopen quickly. Tell us what your business does, how many hours a day the floor is in use, and when you could close, and we will suggest a system that fits.

Concrete floor coating versus sealer

Some businesses ask whether a simple sealer will do. A clear penetrating sealer reduces dusting and staining, but it does not build a protective film, so it wears quickly under carts and forklifts. A full coating system lasts much longer in a working space.