About 20 feet above sea level

Epoxy Flooring in Winter Springs, FL

Garage coatings for a low-lying city whose neighborhoods mostly went up after 1970.

Moisture reading taken at every free on-site visit
A written quote that lists every coat and prep step
Surface prep explained before any grinding begins

Low Elevation Means Testing First

Epoxy flooring in Winter Springs begins with a moisture meter. The city sits at about 20 feet of elevation, one of the lowest spots in the Orlando area, and low ground tends to keep water close to the bottom of a slab. That moisture can push up as vapor and break the bond of a coating that was never designed for it. Testing tells us what we are dealing with before you pay for anything.

What we do with high readings

If a slab reads damp, we use a moisture-mitigating epoxy primer that blocks vapor and gives the topcoats a stable base. If readings are very high or water is visibly coming through cracks, we will say so and suggest fixing drainage or grading first. A coating is not a substitute for water management.

A city built mostly after 1970

Winter Springs had just 609 residents in 1960 and 1,161 in 1970, then jumped to 10,475 by 1980 and 22,151 by 1990. Most garages here were poured during that boom. Concrete that is 30 to 45 years old often has oil stains, shrinkage cracks and sometimes old paint. We grind, degrease and patch before priming.

Get a free estimate or call (689) 232-4403.

From North Orlando to Winter Springs

The city incorporated in 1959 as North Orlando and renamed itself in 1972. Some of the oldest homes date from that early period and may have thinner garage slabs or settled sections. We check for uneven areas and can feather or grind high edges before coating.

Floors for family life

About 52 percent of households here are married couples, and plenty of Winter Springs garages end up storing bicycles, team equipment, a spare refrigerator and a workbench. A full flake floor with a strong topcoat hides wear and keeps the space easy to clean.

Winter Springs Background

Low elevation. The city sits at an elevation of about 20 feet, among the lowest in the Orlando area.
Post-1970 boom. Population went from 1,161 in 1970 to 10,475 in 1980 and 22,151 in 1990, reaching 38,342 in 2020.
Once North Orlando. Incorporated in 1959 as the City of North Orlando, it was renamed Winter Springs in 1972.

Our Services in Winter Springs, FL

Winter Springs Questions

What moisture reading is too high to coat?

It depends on the test method and product. Many systems need a mitigating primer above a certain level. We explain your reading and what it means for your floor at the estimate.

My garage is from the 1980s. Will it need a lot of prep?

Often some. Expect grinding, degreasing and crack filling. The quote will break that down so you know what you are paying for.

Can a coating fix water coming up through cracks?

No. Active water needs to be solved with drainage or grading first. Once the source is handled, we can coat the floor.

Is one coat of epoxy enough?

A single thin coat tends to wear quickly. A primer, a flake or color coat and a durable topcoat build a floor that holds up much longer.

Free Estimates in Winter Springs, FL

Low ground can mean a damp slab. We test first and tell you plainly what the reading means for your floor.

Call (689) 232-4403 Free Estimate